The manufacturer of plastic products Röchling Medical uses Servomold servo motor controlled unscrewing units in 8- and 16-cavity injection moulds for pharmaceutical closure caps. The patented design of the unscrewing system ensures long service lives, minimises wear, and thus gurantees high reliability and efficiency.
The Röchling Group has been developing and producing plastic products for various industries for around 200 years. In addition to industrial and automotive, this also includes the medical division. Here, high-quality, customised components and assemblies are produced, up to and including complete OEM products for the market segments diagnostics, fluid management, surgery and interventional as well as pharma. Plastic Injection
Servomold supplies the servo motor controlled unscrewing units that Röchling Medical uses in one 16-cavity and two 8-cavity injection moulds for the production of pharmaceutical closure caps made of polypropylene (PP). Due to the long-standing cooperation, the medical technology manufacturer had involved the Erbach-based expert for servo-electric automation concepts in the development at an early stage. This enabled the entire project to be started and implemented quickly.
Lucas Meister, project manager at Servomold, explains: “The starting point for this successful cooperation were simple hand sketches with the desired dimensions. We had also already supplied the unscrewing unit for an one-cavity prototype mold. This was similar in design to the later series tools and was suitable for three different screw cap sizes thanks to interchangeable thread core sleeves and stand cores.”
From the experience gained, the possible system sizes and the basic design of the unscrewing units could be derived directly. For the preparation of a quotation, Servomold calculated on this basis the breakaway torques to be expected at the start of unscrewing. Lucas Meister continues: “We took into account influencing parameters such as the mechanical, tribological and processing characteristics of the PP to be processed, as well as the geometry of the cavities. These and the selected mold concept were then our basis for determining the required torques as the basis for the gear layout. Only then did we select the appropriate servo drive, consisting of a servo motor and planetary gearbox, which could meet the customer's requirements in terms of functional and process reliability. The final step in preparing the quotation was to coordinate the matching servo controller and servo amplifier.”
The placement of the order shortly thereafter was the starting signal for the intensive cooperation between the design teams of Servomold and Röchling. This ensured that the three projected injection moulds could be completed almost simultaneously. After Röchling had approved the design, the components were manufactured only two months after the initial contact. In parallel, the parties involved coordinated the interface between the control system and the injection molding machine. Thanks to the universal applicability of the Servomold control units already available at Röchling, this essentially focused on the creation of the sequence program. Thanks to their many years of experience with these control units, Röchling's employees were ultimately able to carry out the commissioning themselves.
Thomas Meister, Managing Director of Servomold, comments: “Again and again, our customers are amazed at how much preliminary work we invest in preparing a quotation. This thorough approach takes time, but more than pays off as the project progresses. Our experience and that of our customers shows that it saves from surprises during startup and continuous operation.”
And Christopher Heyd, Manager Tool Shop at Röchling Medical, confirms: “This operational and functional reliability has been evident at our company since the first use of a Servomold unscrewing unit nine years ago. Because of this, we already have a total of 15 such units in operation today. In addition to unscrewing caps, they are also used to carry out slide movements or to rotate indexing plates. In no case did the projected performance deviate from the actual performance.”
Servomold unscrewing units are based on a patented system in which the drive train is separated from the thread core. This avoids drive influences on the thread core and simplifies assembly and maintenance. Radial forces of the drive train are absorbed by thin ring bearings. Thus, they have no influence on the threaded core, which — driven via a splined shaft profile and optimally concentrically guided by preloaded ball cages — moves back and forth through a brass guide nut. “Thanks to this patented design of the unscrewing system,” says Thomas Meister, “we achieve very long service lives, minimise wear, and thus ensure high reliability and efficiency.”
By clicking on „Subscribe to Newsletter“ I agree to the processing and use of my data according to the consent form (please expand for details) and accept the Terms of Use. For more information, please see our Privacy Policy.
Naturally, we always handle your personal data responsibly. Any personal data we receive from you is processed in accordance with applicable data protection legislation. For detailed information please see our privacy policy.
I hereby consent to Vogel Communications Group GmbH & Co. KG, Max-Planckstr. 7-9, 97082 Würzburg including any affiliated companies according to §§ 15 et seq. AktG (hereafter: Vogel Communications Group) using my e-mail address to send editorial newsletters. A list of all affiliated companies can be found here
Newsletter content may include all products and services of any companies mentioned above, including for example specialist journals and books, events and fairs as well as event-related products and services, print and digital media offers and services such as additional (editorial) newsletters, raffles, lead campaigns, market research both online and offline, specialist webportals and e-learning offers. In case my personal telephone number has also been collected, it may be used for offers of aforementioned products, for services of the companies mentioned above, and market research purposes.
In case I access protected data on Internet portals of Vogel Communications Group including any affiliated companies according to §§ 15 et seq. AktG, I need to provide further data in order to register for the access to such content. In return for this free access to editorial content, my data may be used in accordance with this consent for the purposes stated here.
I understand that I can revoke my consent at will. My revocation does not change the lawfulness of data processing that was conducted based on my consent leading up to my revocation. One option to declare my revocation is to use the contact form found at https://support.vogel.de. In case I no longer wish to receive certain newsletters, I have subscribed to, I can also click on the unsubscribe link included at the end of a newsletter. Further information regarding my right of revocation and the implementation of it as well as the consequences of my revocation can be found in the data protection declaration, section editorial newsletter.
Other design refinements contribute to this, such as high-precision gear components manufactured with very tight tooth width tolerances and optimized profile correction. Meister continues: “The result of this multitude of design measures is a very high system efficiency by avoiding friction which, in addition to torque losses, could in the worst case lead to damage to the thread core surfaces. In addition, the tool life as well as the consistency and reproducibility of the process sequence are increased.”
I-Mold changes name to Servomold
Italian DC motor manufacturer moves into injection moulding
Imprint Cookie-Manager About Media Privacy General Terms and Conditions Help
Copyright © 2023 Vogel Communications Group
Thermoplastic Molding This portal is a brand of Vogel Communications Group. You will find our complete range of products and services on www.vogel.com