Blog

GigaDevice GD-xD-W515-EVAL board features GD32W515 Cortex-M33 MCU, a fingerprint scanner, and an LCD module - CNX Software

CNX Software – Embedded Systems News

Reviews, tutorials and the latest news about embedded systems, IoT, open-source hardware, SBC's, microcontrollers, processors, and more High Voltage Power Board

GigaDevice GD-xD-W515-EVAL board features GD32W515 Cortex-M33 MCU, a fingerprint scanner, and an LCD module - CNX Software

GigaDevice GD-xD-W515-EVAL is a new “all-in-one” Cortex-M33 evaluation kit comprised of a GD32W515 mainboard, a fingerprint board, and an LCD board powered by either a battery or the Mini-USB interface of the GD-Link programmer.

The devkit is mainly used to evaluate various chips from the company, namely the 180 MHz GD32W515PIQ6 Cortex-M33 microcontroller, the GD25Q128E SPI NOR flash, the GSL6157 capacitive fingerprint Sensor, the GD30BC2416 battery management IC, and the GD30LD1002 power management chip.

GigaDevice GD-xD-W515-EVAL board specifications:

There aren’t any spare I/Os on the evaluation kit to connect your own peripherals meaning all I/Os are used for the internal functions of the board which are suitable for Smart Home HMIs, smart door locks, portable devices, etc…

The Arm Keil v5.29 IDE is used for embedded software development and the “GD32AllInOneProgrammer” (actual name: GigaDevice GD-Link Programmer) is used to flash the firmware to the board through the built-in GD-Link programmer. A user guide and project folder are available for the evaluation board, but you need to wait for approval from the company before downloading it. It took two days to get approval for the user guide in my case, bearing in mind that I asked during the Golden Week holiday in China.

The company did not provide pricing for the board, but you can get one for free by requesting one on the product page. I’d assume they’ll only send one if you have a relevant project with a minimum expected production volume.

Thanks to TLS for the tip.

Jean-Luc started CNX Software in 2010 as a part-time endeavor, before quitting his job as a software engineering manager, and starting to write daily news, and reviews full time later in 2011.

Support CNX Software! Donate via cryptocurrencies or become a Patron on Patreon

GigaDevice GD-xD-W515-EVAL board features GD32W515 Cortex-M33 MCU, a fingerprint scanner, and an LCD module - CNX Software

Lcd Power Supply Module Change Ad Consent Do not sell my data